Cluster Detail
Maharashtra     Nashik     Kingaon


 

A cluster is defined as a geographic concentration(a city/town/few adjacent villages and their adjoining areas)of units producing near similar products and facing common opportunities and threats.An artisan cluster is defined as geographically concentrated(mostly in villages/townships)household units producing handicraft/handloom products.In a typical cluster, such producers often belong to a traditional community,producing the long-established products for generations.Indeed,many artisan clusters are centuries old Artisan.

 

About  Kingaon Cluster:-


 Kingaon Cluster falls under Maharashtra State in Nashik district.

The  Kingaon Cluster is able to form above 6 Artisans and 1 SHGs supporting the strong work force.The mobilisation gains momentum day by day.

 

___________________________________________________________________________________________________________________________

 

 

Pottery and Clay Objects:-:-

 

Dharavi in Bombay and Bhadravati in Chandrapur district are concentrating on artistic pottery on co-operative lines. These units manufacture a large variety of painted and truly elegant black pottery. Hand painted glazed tiles are also made.

India is rich in her terracotta and pottery traditions many of which have their roots in prehistory. Pottery has a wide universality and its tradition goes back to span of five millennium.Terracotta pottery has been called the lyric of handicrafts because of its irresistible appeal.A variety of earthen objects are created such as lamps, pitchers, flower vases, pots, musical instruments, candle stands etc.


 
 
Raw materials:- 

 

Basic Material : Mitti / clay, mustard oil, potter wheel, gum, starch, wax,Clay, potters wheel, twigs, dry branches, leaves, firewood, rice straw, Red clay, black clay, pilli mitti, yellow clay,Various types of Mitti (clay/mud), edible gum, starch, clay, wax. Decorative Material:ash, sand, cow-dung, rice husk,Clay, sand, phunanphadi(wet cloth), phuzei(wooden beater), kangkhil, sealed vessel slab, lepshum(cylindrical platform),Plastic clay mitti, mustard oil, potters wheel, edible gum, starch, feldspar, clay, wax .

 


Process:- 

 

The shapes which are required for a variety of uses are turned on the wheel.The certain portions such as the spout or the handle are left out.They are casted separately and than attached to the body. After it, the decoration is done by incising patterns on the surface for making geometrical patterns. 
 
The clay mixed with ash and sand is kneaded by feet, collected and cut with lahasur.It is then kneaded with hand, on peeda and a lump is made.All the solid particles are removed. The ready clay is kept on wheel for making various forms.A potters wheel has short sports, turns on a pivot of hard wood or metal and is provided with a large hub which acts as a revolving table.A vertical stick is inserted in the hole in the rim.The potter throws the kneaded clay into the centre of the wheel, and spins the wheel around with the stick. Due to the centrifugal force the lump of clay is pulled outwards and upwards and shaped into a vessel.This is pulled out with a string, dried and fired in a potters kiln.Clay article after firing turns to terracotta.
 
The pots are fired in simple open-pit kilns that are very efficient and inexpensive for firing pots at a temperature of 700 - 800 degree Celsius.The pots are arranged in layers of pots, a layer of leaves, twigs and cow dung cake is some times added.The mound is then covered with a blanket of rice straw which, in turn is covered with a thin layer of loamy soil.The firing takes four to five hours.
 
Black, red and yellow clay are used for making terracotta items, which are collected in the form of small pieces from Mysore .The material is mixed properly and dried under the hot sun so that any sort of moisture, if present, may evaporate.Then the mixture of wet clay is filtered through a fine sieve to remove pebble. After giving shape with hands the items are then baked in the improvisede kilns covered with cow dung cakes, fuel and saw dust etc.
 
The clay, mixed with ash and sand is kneaded by feet.Then it is kneaded with hand on peeda & a lump is made.All the solid particles like gravel, small pebbles, twigs etc. are removed.The ready clay is kept on wheel to make various forms.A potters wheel has soft spokes, turns on a pivot of hard wood or metal and is provided with a large hub, which acts as revolving table.A vertical stick is inserted in the hole in the rim.The potter throws the kneaded clay into the centre of the wheel and spins the wheel around with a stick. Due to the centrifugal force the lump of clay is pulled outwards & upwards and shaped into a vessel.This is pulled out with a string, dried and fired in a potters kiln.Clay article after firing turns to terracotta.

 

 

Techniques:- 


Artisans who throw the items on wheel in rough shape were taught how to get shapes of different  items as per required sizes. Artisans were advised to make artistic items with the use of thrown pots. The thrown items kept in shade for obtaining leather hard position and then taught to create cut designs with the use of knife. This method was more suited for lampshades.


In the leather hard situation only technique of etching was coached to them as the design appear prominently with etched portion around the design.


Creation of designs by making coils of clay and affixing on base products provided beautiful look.
For smoothening of finished product while it is leather hard position with the use of quartz pebbles was coached to get very good finish for the products.


For better appearance ,which enhances the value of the products was stressed for the crafts persons and taught to given varnish coating, terracotta color application and coating of colors. The importance of color schemes was also informed to participants.

 

___________________________________________________________________________________________________________________________

 

 

How to reach:-

 


By Air:-

 

Nearest airport from Nashik is at Mumbai, 185-km away from the city. From the airport you can take a taxi to reach the bus stand.

 

By Road:-

 

Nashik is 185-kms from Mumbai and is well connected by road. Pune-Nashik highway is 220-kms away from the city. There are also several private and state buses available between Mumbai/Thane and Nashik.

 

By Train:-

 

Nashik is 185-kms from Mumbai and is well connected by road. Pune-Nashik highway is 220-kms away from the city. There are also several private and state buses available between Mumbai/Thane and Nashik.




About Implementing Agency



Maharashtra     Nashik     Maharashtra Institute of Technology Transfer For Rural Areas (MITTRA)