Cluster Detail
Haryana     Faridabad     Badkhal


 

A cluster is defined as a geographic concentration(a city/town/few adjacent villages and their adjoining areas)of units producing near similar products and facing common opportunities and threats.An artisan cluster is defined as geographically concentrated(mostly in villages/townships)household units producing handicraft/handloom products.In a typical cluster,such producers often belong to a traditional community,producing the long-established products for generations.Indeed,many artisan clusters are centuries old Artisan.

 

About Badkhal Cluster:-


Badkhal Cluster falls under Harayan State in Faridabad district.

 


The Badkhal Cluster is able to form above 40 Artisans and 10 SHGs supporting the strong work force.The mobilisation gains momentum day by day.

 

 

Terracotta:-

Haryana produces a large variety of terracotta products such as lamps, pitchers, flower vases, pots, musical instruments, clay toys, goblets, human and animal figures, plaques, medallions, and wall hangings. Two-toned vases, decorative pitchers, and lamp bases with shades of black and terracotta colours are popular.
 
India is rich in her terracotta and pottery traditions many of which have their roots in prehistory. Pottery has a wide universality and its tradition goes back to span of five millennium.Terracotta pottery has been called the lyric of handicrafts because of its irresistible appeal.A variety of earthen objects are created such as lamps, pitchers, flower vases, pots, musical instruments, candle stands etc.

 

In Chairan,Shangmai and Thongiao villages of Thoubal district and Andro in Imphal(East),Terracotta articles,including toys are produced as ritual items for decoration and for utility through out the state.The other crafts made are incense burners,toys,dolls and figurines etc.

 

Raw materials:-

Basic Material : Mitti / clay, mustard oil, potter wheel, gum, starch, wax,Clay, potters wheel, twigs, dry branches, leaves, firewood, rice straw, Red clay, black clay, pilli mitti, yellow clay,Various types of Mitti (clay/mud), edible gum, starch, clay, wax. Decorative Material:ash, sand, cow-dung, rice husk,Clay, sand, phunanphadi(wet cloth), phuzei(wooden beater), kangkhil, sealed vessel slab, lepshum(cylindrical platform),Plastic clay mitti, mustard oil, potters wheel, edible gum, starch, feldspar, clay, wax .


Process:-

 

The shapes which are required for a variety of uses are turned on the wheel.The certain portions such as the spout or the handle are left out.They are casted separately and than attached to the body. After it, the decoration is done by incising patterns on the surface for making geometrical patterns.

The clay mixed with ash and sand is kneaded by feet, collected and cut with lahasur.It is then kneaded with hand, on peeda and a lump is made.All the solid particles are removed. The ready clay is kept on wheel for making various forms.A potters wheel has short sports, turns on a pivot of hard wood or metal and is provided with a large hub which acts as a revolving table.A vertical stick is inserted in the hole in the rim.The potter throws the kneaded clay into the centre of the wheel, and spins the wheel around with the stick. Due to the centrifugal force the lump of clay is pulled outwards and upwards and shaped into a vessel.This is pulled out with a string, dried and fired in a potters kiln.Clay article after firing turns to terracotta.

 

The pots are fired in simple open-pit kilns that are very efficient and inexpensive for firing pots at a temperature of 700 - 800 degree Celsius.The pots are arranged in layers of pots, a layer of leaves, twigs and cow dung cake is some times added.The mound is then covered with a blanket of rice straw which, in turn is covered with a thin layer of loamy soil.The firing takes four to five hours.

Black, red and yellow clay are used for making terracotta items, which are collected in the form of small pieces from Rajasthan and Delhi.The material is mixed properly and dried under the hot sun so that any sort of moisture, if present, may evaporate.Then the mixture of wet clay is filtered through a fine sieve to remove pebble. After giving shape with hands the items are then baked in the improvisede kilns covered with cow dung cakes, fuel and saw dust etc.
 
The clay, mixed with ash and sand is kneaded by feet.Then it is kneaded with hand on peeda & a lump is made.All the solid particles like gravel, small pebbles, twigs etc. are removed.The ready clay is kept on wheel to make various forms.A potters wheel has soft spokes, turns on a pivot of hard wood or metal and is provided with a large hub, which acts as revolving table.A vertical stick is inserted in the hole in the rim.The potter throws the kneaded clay into the centre of the wheel and spins the wheel around with a stick. Due to the centrifugal force the lump of clay is pulled outwards & upwards and shaped into a vessel.This is pulled out with a string, dried and fired in a potters kiln.Clay article after firing turns to terracotta.

 

 

Techniques:- 

 

Women potters practice a unique hand modeling technique, probably dialing back to earlier than Neolithic times before the invention of the wheel.The products made are surface of plain pots, water filters, vases, incense burners, lamps and hukkas. 

 

How to reach:-

 

Faridabad is a southeastern town in the state of Haryana.Faridabad city is the most populated and most industrialized in whole of Haryana. The district headquarter is situated in Faridabad city. Faridabad alone is generating about 60% of the revenues of Haryana with its large number of industrial units. There is a belief that it was Baba Farid, an eminent Sufi saint, who founded Faridabad.Local trains connect Faridabad to Delhi and surrounding areas.aryana Roadways has a fleet of buses connecting the city to the neighboring cities. Metered auto rickshaws, taxis, tongas, private and state-run buses are available for local transport.


 




About Implementing Agency



Haryana     Faridabad     The Crafts Council Of Haryana